ماكبنة صنع قوالب صابون

1- MIXER a) 350 kg approximate weight with double blade shaft b) Surfaces in contact with soap are made of 304 quality stainless (chrome) c) 150 kg capacity product mixer e) Mixer bottom pourer cover is automatic, Engine power is 5.5 kW. e) Protective cover with safety switch 1-SOAP CRUSHING a) Approximate weight of 190 kg b) Surfaces in contact with soap are 304 quality stainless, (chrome) c) Soap first shredding e). Engine power is 5.5 kW. e) Protective grille 4-TRANSFER BELTS a) Total product transfer bands 405 kg approximate weight b) 40 mm high pallets are used with 400 mm intervals and the color is white. c) Engine power is 0.75 kW, 5-VACUUM DUBLEX BODYUNOZ a) Soap stick machine 1250 kg approximate weight b) Double bunous with burning top c) Six single bunous hours capacity 300/500kg d) Spiral liners are water cooled. e) Vacuum chamber, f) Upper hull, spiral sleeves, vacuum chamber and conical head in contact with soap are 304 quality chrome, h) Spirals are aluminum. 6-PRODUCT CUTTING MACHINE a) Approximate weight 238 kg b) Electronic soap cutting, millimetric length adjustable, c) Automatic speed adjustment, e) Soap bar length measurement with encoder, f) Soap feeding band from cutter to stamp machine 0,37 kW motor g) 4.3 Touch Panel 7-PRESSING MACHINE b) Maximum 15/30 cycles/minute, c) Different weights of soap bars can be connected d) 0,75 kw flat band/ automatic press f) 0,37 kw output band, with speed control device, g 7,5 kw motor and speed controller, h) The entire skid system is with sliding bearings. 8-THREE ROLL ROLL a) Rotating balls are chrome steel b) Approximate weight is 280 kg c) Used for soap homogeneity d) 7,5 kw reducer motor, 9-COOLANT a) APPROXIMATELY WEIGHT 210 KG b) Plus cooling +10 degrees, Minus cooling -20 degrees c) With circulation pump 10-Vacuum Pump: a) 106 cm length 56 cm height b) 90 cubic meters oily system vacuum pump 11-Board: a) 100 cm height, 83 cm width, 118 cm height, 120 kg weight, b) Electric usage panel of all machines (380 V/50 H) 11-Packaging machine a) Total power 6kw b) installed power 380v c) capacity 100/ 125 pcs -min d) control power 24v e) motor 1.1kw 13- List of Tools and Spare Parts Given Freely with the Machine: a) Small Bands, b) Thermostatic Heater, c) Grease Pump, d) Budunous hole chuck and conic